Experience the ultimate in fast-drying, UV-resistant epoxy resin with Liquidy Split Ultra UV - the best selling fast set epoxy on the market for DIYers with over 700 positive reviews. This two-part epoxy resin system delivers professional-grade results in record time, making it the clear choice for anyone who demands speed and quality.
Whether you're coating epoxy tumblers, filling voids in river tables, or simply need a quick-drying epoxy resin for your project, Liquidy Split Ultra UV is the perfect solution. With its accelerated drying properties, this epoxy resin is ideal for artists who require a shorter working time, drying time, and curing time.
And with the addition of our Ultra UV inhibitors - hindered amine light stabilizers that protect against the harmful effects of UV rays - Liquidy Split Ultra UV delivers up to 10 times longer lasting clarity compared to Liquidy Split and similar competing products when tested in a simulated UV testing machine.
Unlike some other fast-drying epoxy resin systems, Liquidy Split Ultra UV stays clear while curing, making it an excellent choice for top coats and projects with light colors. And with a mixed viscosity of 6800 cP, it's thick enough to stay put while still flowing smoothly and evenly over any surface.
Best of all, Liquidy Split Ultra UV does not require a UV light to cure, making it easy and convenient to use. So whether you're a professional artist or a DIY enthusiast, Liquidy Split Ultra UV is the clear choice for fast-drying, UV-resistant epoxy resin that will take your art to the next level.
✔️ 15 Minute Working Time
✔️ Dry in 3-4 Hours
✔️ 1:1 Mixing Ratio by Volume
✔️ High Gloss Finish
☀️ Industry Leading UV Resistance
✔️ Made in the US
✔️ Medium Viscosity
✔️ No VOC
✔️ Ultra-Clear
Product Instructions
Step 1. Prepare for Mixing
Gather your epoxy resin, mixing supplies, and personal protective equipment. We recommend at the very least using nitrile gloves, safety glasses, clothing to protect from spills. Be sure to use epoxy resin in a well-ventilated room or use an air-purifying respirator.
Step 2. Pour Epoxy Resin into a Mixing Container
After determining the amount of epoxy resin you will need, measure your desired amount of epoxy resin at a 1:1 ratio by volume into a graduated mixing cup. Pour the resin first, allow it a moment to settle, and then follow up with an equal amount of hardener.
For best results mix a minimum of 2 fluid ounces (60ml) of epoxy resin and hardener. Mixing less than 2 ounces increases the chance of the mixing ratio being off and causing issues during the curing process.
Need help deciding how much epoxy resin is required? Visit our Epoxy Resin Coverage Calculator here.
Step 3. Mix Thoroughly for Four Minutes
Mix the two parts together for a total of four minutes. Be sure to scrape the bottom and sides of the container while mixing so that there is no un-mixed epoxy resin. Aggressive mixing can introduce excessive air, stir slowly but thoroughly. Continue to stir until the epoxy resin no longer has ribbons and returns to clear.
Step 4. Apply to Surface
Apply the epoxy resin to your surface immediately after mixing. You can do this by using your gloved hand, a foam roller, a brush, a trowel, and so many other tools! Make sure that epoxy resin completely covers the surface before moving to the next step. If you do not apply enough epoxy resin it may pull away from the edge. If you apply too much epoxy resin it can drip off or run to one end depending on the surface.
Step 5. Use a Torch or Heat Gun to Remove Trapped Air
Quickly sweep a propane torch or heat gun across the surface being sure to keep the flame 6-8 inches away from the surface. Do not overheat the epoxy resin or hold the heat in one spot for too long. We recommend heating the epoxy resin only during the working time, do not apply heat once the working time has passed. After eliminating bubbles allow the epoxy resin time to cure in the appropriate environment (listed in Technical Data below).
Ensure that you are working in a well-ventilated room or using an air-purifying respirator.
Questions? Check out our FAQ.
Not finding what you need? Email support@ksresin.com for project support.
Recommended Uses
- Creating Epoxy Tumblers
- Canvas Paintings
- Wood Substrates
- Filling Voids
- Small Molds
- Coasters
- Jewelry
- & Much More
Technical Data
Ideal Curing Temperature - 75°F - 80°F
(Temperatures below 75°F can cause issues during curing)
Working Time - 15 Minutes
Dry to Touch - 3-4 Hours
Full Cure - 24 Hours
Maximum Recommended Coating Thickness - 1/8"
Maximum Recommended Casting Thickness - 1/4"
Temperature Resistance - 475°F
Shelf Life (Unopened) - 12 Months
Shelf Life (Opened) - 6 Months (Depending on environment)
Shore D Hardness - 75
Kit Sizes
8oz Kit = 4 ounces Resin + 4 ounces Hardener
16oz Kit = 8 ounces Resin + 8 ounces Hardener
32oz Kit = 16 ounces Resin + 16 ounces Hardener
64oz Kit = 32 ounces Resin + 32 ounces Hardener
1 Gallon Kit = 64 ounces Resin + 64 ounces Hardener
2 Gallon Kit* = 128 ounces Resin + 128 ounces Hardener
* (Shipped in multiple 64oz Containers for ease of use, may be occasionally sent in 128oz containers if 64oz containers are unavailable at the time)